8
English
Read First
Operations and operating status will be notified by tones.
• Operation start ... 2 quick beeps
• Setting change ... 1 short beep
• Operation end .... 1 long beep
• Filter replacement reset ...2 short beeps
• When not usable ..............3 short beeps
•
Notification
.......................3 long beeps
1
LOCK function lamp (orange)
The lamp will be lit when the LOCK function
is active.
Filter replacement lamp (orange)
Lights up approx. 1 month before the dust
collection filter needs to be replaced, and
blinks when it is time to replace the dust
collection filter.
MODE lamps (green)
Indicate the MODE in operation.
FAN lamps (green)
Indicate the active FAN setting
(4 levels: Quiet, Low, Standard,
Turbo).
3
Odor sensor lamp
Indicates the intensity of odors in 3 colors: green, orange, red.
• Green indicates that the air is clean.
Green
Orange
Red
Low
High
Lamp
color
Odors
FAN/MODE button
Press to cycle between FAN
settings and AUTO MODEs.
►
Page 12, 13
UV ON/OFF lamp (Blue)
Lights up when UV rays are emitted.
ON/OFF button
Press to turn the power ON, press
again to turn OFF.
►
Page 12
Operating/Indicator panel
UV ON/OFF button
UV rays are emitted.
►
Page 12
BRIGHTNESS button
Each press changes the lamp
that is lit, and cycles through
indicator lamp brightness levels.
►
Page 13
2
Dust/Particle sensor lamp
Indicates the volume of dust in 3 colors: green, orange, red.
• Green indicates that the air is clean.
Green
Orange
Red
Low
High
Lamp
color
Dust
•
The dust/particle sensor can detect large dust (approx. 2.5μm
and above) and small particles (approx. 1.0-2.5μm). The particle
lamp lights in response to small particles and the dust lamp lights
in response to large dust particles.
01_EN_3P671617-2A.indd 8
2021/11/22 16:27:33
Summary of Contents for MCB50YSAU
Page 2: ...1...
Page 27: ...26 English...
