Daikin QTRON STARLITE User Manual Download

Page: 15 / 25

QTRON Starlite User Manual

Rev 1.2

3.1.2 ADD/CHANGE USER PIN

Command

Information

Press the user number (02-08) then enter the 4 digits
new pin then re-enter the same pin again and press #
after done.



The  keypad  will  sound  2  fast  beeps  after
pressing  02-08,  then  keypad  will  sound
another  2  fast  beeps  after  entering  the  new
pin twice.

To delete the user pin, press user number [02-08] then
press 0000 twice and #.
[02-08]+[0000]+[0000]+[#]



The keypad will sound 2 fast beeps after
pressing 02-08, then keypad will sound
another 2 fast beeps after deleted the user
pin.

Note:

The Code “0000” is not allowed to be used as password.

User pin can only arm & unarm, in away arm mode.

3.2 CHANGE DURESS PIN

Note:

Duress Code

default value: “

2222

”

3.3 SYSTEM’S TIME



This allow user to edit the time of the system.

Command

Information

Press 10 then set the current time in 24 hour
format and press # after done.



The keypad will sound 2 fast beeps after pressing
10, then keypad will sound another 2 fast beeps
after the new time was set.

Command

Information

Press 09 then enter the 4 digits new pin then re-
enter the same pin again and press # after done.



The keypad will sound 2 fast beeps after
pressing 09, then keypad will sound another
2 fast beeps after entering the new pin
twice.

To delete the duress pin, press 09 then press 0000
twice and #.
[09]+[0000]+[0000]+[#]



The keypad will sound 2 fast beeps after
pressing 09, then keypad will sound another
2 fast beeps after delete the duress pin.

Summary of Contents for QTRON STARLITE


























Search results

Summary of Contents for QTRON STARLITE

Reviews:

Related manuals for QTRON STARLITE

Brands by name

Popular brands

Daikin QTRON STARLITE, User Manual

Search results

Summary of Contents for QTRON STARLITE

Reviews:

Related manuals for QTRON STARLITE

Brands by name

Popular brands