Si241307
Procedure to Remove El. Compo. Box
Removal Procedure
3
2. Procedure to Remove El. Compo. Box
Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
1
Remove the wire
harness connectors
from the PCB.
2
Dismount the outdoor
air thermistor and the
heat exchanger
thermistor.
Attach to the 3rd
row of heat
exchanger pipe at
30mm from the left
end.
Route thermistor
wire through the
specified section to
prevent wire pinching.
Thermistor
Thermistor retaining spring