DHOS-CS-IM-2107004D
33
Point Attribute List and Functions
Point Attribute
Point Types
available with
attribute
Function
Point ID
All
Auto generated ID
*Point Name
All
IMPORTANT: Edit name to identify point easily in user
app.
*Icon
All
IMPORTANT: Edit icon to correctly represent the point
in user app.
Point Type
All
Description of device.
Point Usage
All
Detailed attribute of device. Used for default
grouping.
Status Keyword
Status, Switch
Parent Point ID
Status
Parent ID. Default is None.
If set, update information is sent to parent
management point
Switch and status can be a parent.
Hide Point
All
Enable to hide the point from being seen in user app.
The point values will still be monitored in the
background. Default is “Disabled”.
Point Not In Use
All
This point is not used in this controller.
The point values will not be monitored in the
background. Default is “Disabled”.
E.g. WAGO IO points that are not connected with any
device can be set to “Point Not In Use”
Record to History
All
Status change information is stored in History DB.
Store Data to DB
All
Operation information is stored in DB
Setpoint Storage
Ac
Enable to save setpoint values in database.
Default is “Disabled”
Temperature Storage
Ac
Enable to save room temperature measurements in
database for trending.
Default is “Disabled”
Off delay
Status,
SensorStat
Enable to delay point off status change from device
off status.
If 1 is set, point status will off in 1 min.
Signal Invert
Status, Switch
Enable to invert the on/off status.
If this is set to enable, when device is OFF, status is
ON.
C type switch
Switch
Enable to handle point as a C type switch (2-way
switch). Use with status point combination.
Error type
Status
This is used to customize error indication.
Alert type
Status
This is used to customize alert indication.
Fan Speed Level
Ac
Change fan speed capability to adjust to actual AC fan
speed capability.
*Table to be continued on following page
