Field Settings for Outdoor Unit
SiUS371901E
193
Field Settings and Test Operation
Mode 2
Mode 2 is used to set field settings of the outdoor unit and system.
•
Changing and access the setting in mode 2:
Once mode 2 is selected (press the
MODE (BS1)
button for more than 5 seconds), you can select the wanted
setting. It is done by pressing the
SET (BS2)
button.
Accessing the selected setting's value is done by pressing the
RETURN (BS3)
button once.
•
To quit and return to the initial status, press the
MODE (BS1)
button.
•
Changing the value of the selected setting in mode 2:
- Once mode 2 is selected (press the
MODE (BS1)
button for more than 5 seconds) you can select the
wanted setting. It is done by pressing the
SET (BS2)
button.
- Accessing the selected setting's value is done by pressing the
RETURN (BS3)
button once.
- Now the
SET (BS2)
button is used to select the required value of the selected setting.
- When the required value is selected, you can define the change of value by pressing the
RETURN (BS3)
button once.
- Press the
RETURN (BS3)
button again to start operation according to the chosen value.
Example:
Checking the content of parameter [2-18] (to define the high static pressure setting of the outdoor unit’s fan).
[A-B]=C in this case defined as: A=2; B=10; C=the value we want to know/change
Make sure the segment indication is as during normal operation (default situation when shipped from factory).
•
Press the
MODE (BS1)
button for over 5 seconds; result segment display:
•
Press the
SET (BS2)
button 18 times; result segment display:
•
Press the
RETURN (BS3)
button once; the value which is returned (depending on the actual field situation), is
the status of the setting. In the case of [2-18], default value is "0", which means the function is not active.
Result: mode2 setting 18 is addressed and selected, return value is the current setting situation.
•
To change the value of the setting, press the
SET (BS2)
button until the required value appears on the
segment indication. When achieved, define the setting value by pressing the
RETURN (BS3)
button once. To
the chosen setting, confirm again by pressing the
RETURN (BS3)
button.
•
To leave the monitoring function, press the
MODE (BS1)
button two times, you will return to the default
situation when shipped from factory.
Operating the DIP switches
By operating the DIP switches it is possible to:
Result: mode 2 is accessed.
Result: mode 2 setting 18 is addressed.
What to do with DIP switch DS1
1
Cool/Heat selector (refer to the manual of the Cool/Heat selector switch)
OFF: not installed (factory setting)
2-4
NOT USED
DO NOT CHANGE THE FACTORY SETTING
What to do with DIP switch DS2
1-4
NOT USED
DO NOT CHANGE THE FACTORY SETTING
Summary of Contents for REYQ-XA
