background image

1

„

English

Safety Precautions

Read these Safety Precautions carefully to ensure correct installation.

• 

This manual classi

fi

 es the precautions into DANGER, WARNING and CAUTION. 

• 

Be sure to follow all the precautions below: they are all important for ensuring safety.

DANGER ...... Indicates an imminently hazardous situation which, if not avoided, will result in death or serious 

injury.

WARNING .... Failure to follow any of WARNING is likely to result in such grave consequences as death or serious 

injury.

CAUTION ..... Failure to follow any of CAUTION may in some cases result in grave consequences.

The following safety symbols are used throughout this manual: 

• 

Be sure to observe this instruction. 

Be sure to establish a ground connection. 

Never attempt. 

After completing installation, test the unit to check for installation errors. Give the user adequate instructions 

• 

concerning the use and cleaning of the unit according to the Operation Manual. 

 DANGER

Refrigerant gas is heavier than air and replaces oxygen. A massive leak could lead to oxygen depletion, especially 

• 

in basements, and an asphyxiation hazard could occur leading to serious injury or death.
If the refrigerant gas leaks during installation, ventilate the area immediately. 

• 

Refrigerant gas may produce a toxic gas if it comes in contact with 

fi

 re such as from a fan heater, stove or cooking device. 

Exposure to this gas could cause severe injury or death.

After completing the installation work, check that the refrigerant gas does not leak. 

• 

Refrigerant gas may produce a toxic gas if it comes in contact with 

fi

 re such as from a fan heater, stove or cooking device. 

Exposure to this gas could cause severe injury or death.

Do not ground units to water pipes, telephone wires or lightning rods because incomplete grounding could cause a 

• 

severe shock hazard resulting in severe injury or death, and to gas pipes because a gas leak could result in an 

explosion which could lead to severe injury or death.
Safely dispose of the packing materials.

• 

Packing materials, such as nails and other metal or wooden parts, may cause stabs or other injuries. 
Tear apart and throw away plastic packaging bags so that children will not play with them. 
Children playing with plastic bags face the danger of death by suffocation. 

Do not install unit in an area where 

fl

 ammable materials are present due to risk of explosion resulting in serious 

• 

injury or death.
Do not ground units to telephone wires or lightning rods because lightning strikes could cause a severe shock 

• 

hazard resulting in severe injury or death, and to gas pipes because a gas leak could result in an explosion which 

could lead to severe injury or death.

 WARNING

Installation should be left to the authorized dealer or another trained professional. 

• 

Improper installation may cause water leakage, electrical shock, 

fi

 re, or equipment damage.

Install the air conditioner according to the instructions given in this manual.

• 

Incomplete installation may cause water leakage, electrical shock, 

fi

 re or equipment damage.

Be sure to use the supplied or exact speci

fi

 ed installation parts.

• 

Use of other parts may cause the unit to come to fall, water leakage, electrical shock, 

fi

 re or equipment damage.

Install the air conditioner on a solid base that is level and can support the weight of the unit.

• 

An inadequate base or incomplete installation may cause injury or equipment damage in the event the unit falls off the base or comes loose.

Electrical work should be carried out in accordance with the installation manual and the national, state and local 

• 

electrical wiring codes.

Insuf

fi

 cient capacity or incomplete electrical work may cause electrical shock, 

fi

 re or equipment damage.

Be sure to use a dedicated power circuit. Never use a power supply shared by another appliance. 

• 

Follow all appropriate electrical codes.
For wiring, use a wire or cable long enough to cover the entire distance with no splices if possible. 

• 

Do not use an extension cord. Do not put other loads on the power supply. 

Use an only a separate dedicated power circuit.

(Failure to do so may cause abnormal heat, electric shock, 

fi

 re or equipment damage.)

Use the speci

fi

 ed types of wires for electrical connections between the indoor and outdoor units. 

• 

Follow all state and local electrical codes. 

Firmly clamp the inter-unit wire so their terminals receive no external stresses. 
Incomplete connections or clamping may cause terminal overheating, 

fi

 re or equipment damage.

01_EN_3P273470-2.indd   1

01_EN_3P273470-2.indd   1

1/6/2011   12:04:42 PM

1/6/2011   12:04:42 PM

Summary of Contents for RKN15KEVJU















Reviews: