SiUS041829E
Main Functions
Part 4 Functions and Control
39
R4003383
6.
Press to select the desired time.
7.
Press .
8.
Press to select the desired temperature.
9.
Press .
10.
Press to complete the setting.
Display
NOTE
• The time can be set between 0:00 and 23:50 in 10-min
u
te intervals.
• To ret
u
rn to the ON/OFF TIMER mode setting, press .
• Proceed to
STEP
9
when setting the OFF TIMER.
• The time will be set.
• “ ” and the temperat
u
re blink.
• The temperat
u
re can be set between 50°F (10°C) and 90°F (32°C).
COOL or AUTO: The
u
nit operates at 64°F (18°C) even if it is set at 50°F (10°C) to 63°F (17°C).
HEAT or AUTO : The
u
nit operates at 86°F (30°C) even if it is set at 87°F (31°C) to 90°F (32°C).
• To ret
u
rn to the time setting, press .
• The set temperat
u
re is only displayed when the mode setting is on.
• Be s
u
re to direct the remote controller toward the indoor
u
nit and check for a receiving
tone and blinking of the m
u
lti-monitor lamp.
• The m
u
lti-monitor lamp blinks twice.
• The temperat
u
re will be set and go to the next reservation.
• Temperat
u
re and time are set in the case of ON TIMER operation, and the time is set in
the case of OFF TIMER operation.
• The next reservation screen will appear.
• To contin
u
e f
u
rther settings, repeat the proced
u
re from
STEP
4
.
• “ ” is displayed on the LCD and WEEKLY TIMER operation is activated.
• The TIMER lamp periodically lights orange.
The m
u
lti-monitor lamp will not light orange if all the reservation settings are deleted.
• A reservation made once can be easily copied and the same settings
u
sed for another
day of the week. Refer to
Copy mode
.
Notes on WEEKLY TIMER operation
• Do not forget to set the clock on the remote controller first.
• The day of the week, ON/OFF TIMER mode, time and set temperat
u
re (only for ON TIMER mode) can be set with the WEEKLY TIMER.
Other settings for the ON TIMER are based on the settings j
u
st before the operation.
• WEEKLY TIMER and ON/OFF TIMER operation cannot be
u
sed at the same time. The ON/OFF TIMER operation has priority if it is set while
WEEKLY TIMER is still active. The WEEKLY TIMER will enter the standby state, and “ ” will disappear from the LCD. When the ON/
OFF TIMER is
u
p, the WEEKLY TIMER will a
u
tomatically become active.
• Only the time and temperat
u
re can be set with the WEEKLY TIMER. Set the WEEKLY TIMER only after setting the operation mode, the airflow
rate and the airflow direction ahead of time.
• T
u
rning off the circ
u
it breaker, power fail
u
re, and other similar events will render operation of the indoor
u
nit’s internal clock inacc
u
rate. Reset
the clock.
• can be
u
sed only for the time and temperat
u
re settings. It cannot be
u
sed to go back to the reservation n
u
mber.
Summary of Contents for RX09RMVJU9
Page 17: ...SiUS041829E Part 2 Specifications 13 1 Specifications 14 Part 2 Specifications ...
Page 125: ...SiUS041829E Check Part 6 Service Diagnosis 121 18 class R25105 1 2 3 4 Multimeter ...
Page 127: ...SiUS041829E Check Part 6 Service Diagnosis 123 18 class R20704 W V U DC_P1 DC_N1 ...
Page 143: ...SiUS041829E Operation Limit Part 8 Appendix 139 4 Operation Limit RX09 12 18RMVJU9 3D092209E ...
