Electrical Box
Si001555EC
8
Removal Procedure
5
Disconnect the
connector [S80] and
pull out the clamp (Hole
No.1).
[S80]: four way valve coil
The cooling only models
have no harness for [S80].
When reassembling,
connect the connectors in
the following order. Be sure
to insert the wiring clamps of
lead wires into the
appropriate holes.
(1) [S90]: Hole No.15, 14,
13, 7, 3
(2) [S40]: Hole No.16, 2
(3) [S20]: Hole No.11
(4) [S80]: Hole No.1
6
Disconnect the
connector [S20] and
pull out the clamp (Hole
No.11).
[S20]: electronic expansion
valve coil
7
8
Pull out the clamp (Hole
No.16) and disconnect
the connector [S40].
Pull out the clamp (Hole
No.2).
Step
Procedure
Points
[S80]
Clamp
(R21967)
14
15
16
17
13
Hole No. for wiring clamps
1 3 5 7 9 11
2 4 6 8 10
12
(R21996)
[S20]
Clamp
(R21968)
Clamp
Clamp
[S40]
(R21998)
[S40]: overload protector
