SiK401004_A
41
FUNCTION CONTROL
3.3 Installation of Wired Controller and Project Debugging
3.3.1 Installation of Wired Controller
Fig.3.3.1: Sketch for Installation of Wired Controller
No.
1
2
3
4
5
Description
Socket’s base box
installed in the wall
Soleplate of
controller
Screw M4X25
Front panel of
controller
Screw
ST2.2X6.5
Fig.3.3.1: Sketch for Installation of Wired Controller. Pay attention to the following items
during installation of wired controller:
1. Cut off power supply of heavy-current wire embedded in mounting hole in the wall
before installation. It is prohibited to perform the whole procedure with electricity.
2. Pull out 4-core twisted pair line in mounting hole and then make it through the rectangle
hole at the back of controller’s soleplate.
3. Joint the controller’s soleplate on wall face and then fix it in mounting hole with screws
M4X25.
4. Insert the 4-core twisted pair line through rectangle hole into controller’s slot and buckle
the front panel and soleplate of controller together.
5. At last, fix the controller’s front panel and soleplate with screws ST2.2X6.5.
Caution:
During connection of wirings, pay special attention to the following items to avoid
interference of electromagnetism to unit and even failure of it.
1. To ensure normal communication of the unit, signal line and wiring (communication) of
wired controller should separate from power cord and indoor/outdoor connection lines.
The distance between them should be kept 20cm in min.
2. If the unit is installed at the place where there is interference of electromagnetism,
signal line and wiring (communication) of wired controller must be shielded on twisted
pair lines.
Summary of Contents for RY24PEV1K
