SA Indoor Unit - FFQ, FCQ, FDBQ, FBQ, FHQ Series
SiBE121021_C
278
Operation Manual
9
English
FAN SPEED CONTROL
Press FAN SPEED CONTROL button.
UP AND DOWN DIRECTION
Up and down adjustment
MOVEMENT OF THE AIR FLOW FLAP
NOTES
Operate in the following order.
Heating
PROGRAM TIMER OPERATION
High or Low fan speed can be selected.
The micro computer may sometimes control
the fan speed in order to protect the unit.
AIR FLOW DIRECTION
ADJUST
Press the AIR FLOW DIRECTION
ADJUST button to select the air
direction as shown below.
DISPLAY appears and the
air flow direction
continuously varies.
(Automatic swing setting)
Press AIR FLOW
DIRECTION ADJUST
button to select the air
direction of your choice.
DISPLAY vanishes the air
flow direction is fixed
(Fixed air flow direction
setting).
For the following conditions, micro computer
controls the air flow direction so it may be
different from the display.
Operation
mode
Operation
conditions
•
If you try cooling or programmed drying,
while the flaps are facing downward, air
flow direction may change unexpectedly.
There is nothing wrong with the
equipment. This serves to prevent dew
formed on parts in the air discharge
outlet from dripping.
•
Operation mode includes automatic
operation.
•
The movable limit of the flap is changeable.
Contact your Daikin dealer for details.
•
When starting operation
•
When room
temperature is higher than
the set temperature
•
At defrost operation (The
flaps blow horizontally to
avoid blowing cold air
directly on the occupants
of the room.)
•
The timer is operated in the following two ways.
Programming the stop time (
)
.... The system stops
operating after the set time has elapsed.
Programming the start time (
)
.... The system starts
operating after the set time has elapsed.
•
The timer can be programmed a maximum
of 72 hours.
•
The start and the stop time can be
simultaneously programmed.
