T Sense Keypad Quick User & Installer Manual Rev 2.0
ARM AND DISARM SYSTEM
Default Master Pin 111 111
QUICK ARM
ARM with PIN
DISARM With PIN
Auto Home
▪ Press & hold button [1] for 2 seconds
If enable Partition Option
▪ Press
[1 or 2] + #
Press 1 for partition 1
Press 2 for partition 2
▪
Press
[Master PIN]
+
[#]
By default, keypad will arm partition
1 only
If enable Partition Option
▪
Press
[Master PIN] +[#]+[1 or 2]+[#]
Press 1 for partition 1
Press 2 for partition 2
▪
Press
[Master PIN]
+
[#]
If enable Partition Option
▪
Press
[Master PIN]+
[#] +[1 or 2] +[#]
Press 1 for partition 1
Press 2 for partition 2
Day
▪ Press & hold button [2] for 2 seconds
If enable Partition Option
▪ Press
[1 or 2] + #
Press 1 for partition 1
Press 2 for partition 2
Night
▪ Press & hold button [3] for 2 seconds
If enable Partition Option
▪ Press
[1 or 2] + #
Press 1 for partition 1
Press 2 for partition 2
Force
▪ Press & hold button [4] for 2 seconds
If enable Partition Option
▪ Press
[1 or 2] + #
Press 1 for partition 1
Press 2 for partition 2
REMARKS
-
Default Master PIN = 111111
- The
ARMED LED (RED)
is
ON
if the system is armed.
ENABLE PARTITION OPTION
Steps to Enable Partition Option
▪
Press [
▼
] for 2 sec + [
▼
for PART] + [Press 1 to toggle] + [#]
REMARKS
-
By default, partition option is disabled
AUTOMATION CONTROL
COMMAND
▪ Press & hold button [5] for 2 seconds
▪
Press the relevant module number (01 to 16) to toggle output
▪
Press * to exit automation menu
REMARKS
- The keypad will beep twice upon confirmation or else, an error tone will sound.
- To on/off all output: [00] is pressed to toggle all output. System priority to turn OFF all output if there is any output is ON.
1
