13 Configuration
Installation and operation manual
19
VAM350~2000J8VEB
Heat reclaim ventilation unit
4P664011-1 – 2021.08
No
Yes
Field Settings
Save the settings?
Setting
Return
11
After you have completed all changes, press the Cancel button
(a) twice to return to the normal mode.
b
a
Case 2: Change settings with BRC301B61
Make sure that the switch box lid on the heat reclaim ventilation unit
is closed.
1
With the unit in normal mode, press the Inspection/Trial button
(a) for more than 4 seconds to enter the local setting mode.
2
Use the Ventilation mode button (up - b) and the Airflow rate
button (down - b) to select a mode number.
Result:
The code display is blinking.
3
To configure settings for individual units under group control,
press the Timer setting on/off button (c) and select the number
of the unit that you want to configure.
4
To select the setting switch number, press the top section of the
Timer button (d). To select the setting position number, press
the lower section of the Timer button (e).
5
Press the Program/Cancel button (f) once to enter the setting.
Result:
The code display stops blinking and lights up.
6
Press the Inspection/Trial button (a) to return to normal mode.
c
f
a
d e
b
SETTING
INFORMATION
Setting 18(28)-11 CANNOT be selected with this controller.
Case 3: Change settings with BRC1H
INFORMATION
Please refer to the Installer and user reference guide of the
BRC1H user interface.
