Si-95
Functions
Functions Inverter K Series
35
1.19.3 When the Float Switch is Tripped During Heating Operation:
During heating operation, if the float switch is not reset even after the 5 minutes operation, 5 seconds stop,
5 minutes operation cycle ends, operation continues until the switch is reset.
1.19.4 When the Float Switch is Tripped and “AF” is Displayed on the Remote Controller:
Note:
If the float switch is tripped five times in succession, a drain malfunction is determined to have occurred.
“AF” is then displayed as operation continues.
SI-95.BOOK Page 35 Friday, March 31, 2000 10:59 AM
