Test Operation
SiE-05C
86
Test Operation Inverter K Series
Group No. setting by wireless remote controller for centralized control
1. When in the normal mode, push
button for 4 seconds or more, and operation then enters the
“field set mode.”
2. Set mode No. “00” with
button.
3. Set the group No. for each group with
button (advance/backward).
4. Enter the selected group numbers by pushing
button.
5. Push
button and return to the normal mode.
Group No. Setting
Example
If you have to set the address for each unit for calculating cost, etc., set the mode No. to “30.”
SI-05C.BOOK Page 86 Monday, November 6, 2000 4:13 PM
Все каталоги и инструкции здесь:
http
:
//splitoff.ru/tehn-doc.html
