SiE-05C
Test Operation
Test Operation Inverter K Series
101
Control Section
1.19.3 Control Wiring
Wiring Outline
Wiring specifications
1
Selector button
9
Clearing button for malfunction code memory
Selects group belonging to the zone.
Push to reset the malfunction code.
2
Zone setting button
10 Filter sign reset button
Turns zone setting mode on or off.
Turns the filter cleaning indicator off.
3
Button for refrigerant system display
11 Operation mode selector button
Indicates indoor unit group connected to same outdoor unit.
Sets to operation mode.
4
Zone/group changeover button
12 Timer ON button
Selects zone or group display.
Defines control mode and timer No.
5
Advance/backward button
13 Control mode button
Sets zone with several groups.
Selects the control mode.
6
ON/OFF button
14 Timer No.button
Runs or stops for each zone.
Selects timer No. (Only when used in combination with a
schedule timer)
7
Temperature setting button
15 Zone operation ON/OFF button
Push to set temperature.
Defines zone.
8
Inspection/test operation button
Push when you want to carry out inspection or test operation.
Power supply wiring
2 mm
²
Transmission wiring for control 0.75 ~ 1.25 mm
²
sheathed vinyl cord or cable (double core); max. extension
1000 m (total wiring length 2000 m)
Power supply switch
10A
SI-05C.BOOK Page 101 Monday, November 6, 2000 4:13 PM
Все каталоги и инструкции здесь:
http
:
//splitoff.ru/tehn-doc.html
