19
Spark Plug Service
Recommended spark plugs: BPR6HS (NGK)
To ensure proper engine operation, the spark plug must be properly gapped and free of
deposit.
If the engine has been running, the muffler will be very hot. Be careful not to touch the
muffler.
①
Remove the spark plug cap
②
Clean any dirt from around the spark plug base.
③
Use the wrench supplied in the tool kit to remove the spark plug.
④
Visually inspect the spark plug. Discard it if the insulator
is cracked or chipped. Clean the spark plug with a wire
brush if it is to be reused.
⑤
Measure the plug gap with a feeler gauge.
Correct as necessary by carefully bending the side
electrode.
The gap should be: 0.7-0.8mm(0.028-0.031 in)
Summary of Contents for SGE1000M
Page 1: ...P No 15750139000 ...
Page 6: ...5 NAME OF PARTS ...
Page 7: ...6 CHOKE LEVER SPARK PLUG CAP INSIDE THIS COVER ...
Page 26: ...25 WIRING DIAGRAM ...