27
INSTALLATION INSTRUCTIONS (optional)
INSTALLATION INSTRUCTIONS
Location
- The air conditioner should be placed on a firm
foundation to minimize noise and virbration. For
safe and secure positioning, place the unit on a
smooth, level floor strong enough to support the
unit.
- The unit has casters to aid placement, but it
should only be rolled on smooth, flat surfaces.
Use caution when rolling on carpet surfaces. Do
not attempt to roll the unit over objects.
- The unit must be placed within reach of a
properly rated grounded socket.
- Never place any obstacles around the air inlet
or outlet of the unit.
- Allow 30cm to 100cm of space from the wall
with for efficient air-conditioning.
Window slider kit Installation
Your window slider kit has been designed to fit
most standard Vertical and horizontal window
applications, However, it may be necessary
for you to improvise/modify some aspects of
the installation procedures for certain types
of window. Please refer to Fig. 6& Fig.7 for
minimum and maximum window openings.
Window slider kit can be fixed with a bolt
(see Fig.7a).
Note:
If the window opening is less than the
mentioned minimum length of the window slider
kit, cut that one with a hole in it short to fit for
the window opening.
Do never cut out the hole in window slider kit.
