Daitsu ASD18UI-DA, Owner'S Manual

9

Requirements for electric connection

Safety precaution

Grounding requirement

1. Must follow the electric safety regulations when installing the unit.

    circuit break.

3. Make sure the power supply matches with the requirement of air conditioner.

    Unstable power supply or incorrect wiring or malfunction. Please install proper 

    power supply cables before using the air conditioner.

4. Properly connect the live wire, neutral wire and grounding wire of power socket.

5. Be sure to cut off the power supply before proceeding any work related to 

    electricity and safety.

7. If the supply cord is damaged, it must be replaced by the manufacturer, its 

8. The temperature of refrigerant circuit will be high, please keep the interconnec-

    tion cable away from the copper tube.

9. The appliance shall be installed in accordance with national wiring regulations.

10.Installation must be performed in accordance with the requirement of NEC 

   and CEC by authorized personnel only

    grounding with specialized grounding device by a professional. Please make 

    sure it is always grounded effectively, otherwise it may cause electric shock.

2. The yellow-green wire in air conditioner is grounding wire, which can't be used 

    for other purposes.

3. The grounding resistance should comply with national electric safety regulations.

4. The appliance must be positioned so that the plug is accessible.

5. An all-pole disconnection switch having a contact separation of at least 3mm in 

6. Including an circuit break with suitable capacity, please note the following table. 

    Air switch should be included magnet buckle and heating buckle function, it can 

    protect the circuit-short and overload. (Caution: please do not use the fuse only 

    for protect the circuit)

Air-conditioner Circuit break capacity

09K

10A

12K

10A

18K

10A