Page
54
of 71
SK2019 FSTD-SLIM-EC-FLEX-001_01
When DIP SW2=OFF, room temperature is shown on temperature display area.
6.
Mode setting
Press
to set COOL, HEAT, FAN or DRY mode alternatively.
7.
Key Lock
Press
and
to set key lock function. Key lock icon is on or off when key lock function is set to on or off.
8.
Fan speed setting
Press
to set LOW, MEDIUM, HIGH or AUTO speed.
9.
ON/OFF setting
Press
to turn on or off the unit.
10.
Temperature unit setting
Press
and
at the same time to change temperature unit between Celsius and Fahrenheit.
11.
Network control (Only master unit can control slave units)
Press
four times to set network control and “Network” icon is on. The slave unit number is blinking in real time display
area.
Press
or
to select slave unit which is online. The offline slave unit number is not shown.
Press
to select parameters: ON/OFF unit, temperature, mode, fan speed, swing and sleep.
Press
to set the selected parameter.
1)
ON/OFF unit: Press
button once, “H” blinks in master-slave display area, then press
to turn on unit (“H” blinks)
or turn OFF unit (“S” blinks).
2)
Temperature: Press
twice, temperature blinks in temperature display area, then press
or
to set
temperature.
3)
Mode: Press
three times, Mode icon blinks in mode display area, then press
to select mode.
4)
FAN SPEED: Press
four times, fan speed icon blinks in fan speed display area, then press
to set fan speed.
5)
Sleep: Press
five times, sleep icon blinks then press
to set sleep mode.
Press
to confirm settings and exit. If no operation within 6 seconds, it will automatically exit and the setting will not be
saved.
12.
Global control setting
Press
five times to set global control and “Network” icon blinks.
1)
Press
, timer on/off icon blinks and all slave units’ timer on/off function setting are cancelled.
2)
Press
, all slave units time are set to the same as master units.
Press
, master unit sends commands to all online slave units. “Network” icon is off. If timer on/off function is set on mater
unit, “Network” icon blinks until Timer on/off disappears.
