Daitsu HS-18UIEK, Owner'S Manual

Operation of wireless remote control  

Names and functions of wireless remote control  

Notice: This is a general use remote controller, it could be used  for  the air conditioners 

with multifunction; For some  function, which the model dosen’t have, if press the correspon

-

ding button on the remote controller that the unit will keep the original  running status.  

+ 

+ button  

●For presetting temperature increasing. 

Press this button,can set up the tempe

-

rature, when unit is on. Continuously 

press and  hold this button for more than 

2 seconds,  the corresponding contents 

will be  changed rapidly, until unpress 

the button then send the information, ºC 

(ºF) is displaying all along. In Auto mode, 

the temp-erature can not be set up, but 

operate this button can send the signal. 

Centigrade setting range :16-30; Fahren

-

heit scale setting range 61-86.   

Remote control 

- 

- button  

● Presetting temperature can be decrea

-

sed. Press this button, the temperature 

can be set up, continuously press this 

button  and hold for two seconds, the re

-

lative  contents can quickly change, until 

unhold  this button and send the order 

that the ºC (ºF) signal will be displayed 

all the time. The temperature adjustment 

is unavailable under the Auto mode, but 

the order can be sent by if pressing this 

button.   

X-FAN 

X-FAN button  

● PressingX-FAN button in COOL or DRY

mode,the icon        is displayed and the  

indoor fan will continue operation for 10 

minute in order to dry the indoor unit  even 

though you have turned off the unit. After 

energization, X-FAN OFF is defaulted.  X-

FAN is not available in AUTO, FAN or HEAT 

mode. 

Note: X-FAN is the alternative expression  
of BLOW for the purpose of understanding. 

LIGHT  

LIGHT button  

● Press this button at unit On or Off 

status,  Light On and Light Off can be 

set up. After powered on, Light On is 

defaulted.    

TURBO button  

● In Cool or Heat mode, press this button 

can turn on or turn off the Turbo function. 

After turned on the Turbo function, its signal 

will be displayed. When switching the mode 

or changing fan speed, this function will be 

canceled automatically.  

8

TURBO