Installation and Maintenance of Healthy Filter
Installation Instructions
1. Forcibly pull the panel for a specific angle from the two
ends of the front panel according to the arrow direction.
Then pull the air filter downwards to remove it. (See Fig.a)
2. Mount the healthy filter onto the air filter, (as shown in
Fig.b). If the air filter cannot be in-stalled, please mount the
healthy filter on the front case. (as shown in Fig.c)
3. Mount the air filter properly along the arrow
direction in Fig.d, and then close the panel cover.
Fig. a
Fig. b
Air filter
Healthy filter
Fig. c
Healthy filter
Fig. d
Cleaning and Maintenance
Take out the healthy filter before cleaning and reinstall it after cleaning according to the ins
-
tallation instruction. Pay special attention to that silver ion filter can’t be cleaned with water,
while active carbon, photocatalyst, low temperature conversion (LTC) catalyst, formaldehyde
eliminator, catechin or mite killing filter can, but can’t with brush or hard things. Dry it in the
shade or sun after cleaning, but not by wiping.
Service Life
The healthy filter commonly has its usage lifetime for one year under normal condition. As for
silver ion filter, it is invalid when its surface becomes black (green).
●
This supplementary instruction is provided for reference to the unit with healthy filter. If the
graphics provided herein is different from the physical goods, the latter one shall prevail.
The quantity of healthy filters shall be based on the actual delivery.
- 27 -
