Daitsu SPACE V4 Series User Manual Download

Page: 10 / 29

5.4 Adjusting space operation mode

Adjusting space operation mode by interface

Go to ''MENU'' > ''OPERATION MODE'' . Press"OK",

the following page will appear:

There are three modes to be selected including

HEAT, COOL and AUTO mode. Use the ''

◄

，

►

to scroll, press ”OK” to select.

Even you don’t press OK button and exit the page by

pressing BACK button, the mode would still be

effective if the cursor had been moved to the

operation mode.

If there is only HEAT(COOL) mode, the following page

will appear:

The operation mode can not be changed.

If you

select…

Then the space operation mode is…

Always heating mode

HEAT

Always cooling mode

COOL

AUTO

Automatically changed by the software

based on the outdoor temperature (and

depending on installer settings of the

indoor temperature), and takes monthly

restrictions into account.

Note: Automatic changeover is only

possible under certain conditions.

See the ''FOR SERVICEMAN''> ''AUTO

MODE SETTING'' in "Installation and

owner's manual (

V4 space

indoor

unit)".

Adjust space operation mode by the room thermostat

, see ''ROOM THERMOSTAT'' on "Installation and

owner's manual (

V4 space

indoor unit)".

Go to ''MENU''>''OPERATION MODE'', if you press

any key to select or adjust, the page will appear:

6.1 Operation Mode

6 OPERATION

See "5.4 Adjusting space operation mode"

6.2 Preset Temperature

PRESET TEMPERATUER has PRESET TEMP.\

WEATHER TEMP. SET\ECO MODE 3 items.

6.2.1 PRESET TEMP.

PRESET TEMP. function is used to set different

temperature on different time when the heat mode or

cool mode is on.
PRESET TEMP. =PRESET TEMPERATUER
The PRESET TEMP. function will be off in these

conditions.
1 ) AUTO mode is running.

2) TIMER or WEEKLY SCHEDULE is running.

Go to ''MENU'' > ''PRESTE TEMPERATURE''

>''PRESET TEMP''. Press ''OK''.
The following page will appear:

Operation mode setting

：

OPERATION MODE

COOL

AUTO

HEAT

CONFIRM

Operation mode can only be set

heat mode:

OPERATION MODE

HEAT

CONFIRM

Cool/heat mode is controlled by

the room thermostat.

Please adjust the operation mode

by the room thermostat.

CONFIRM

Operation mode can only be set

cool mode:

OPERATION MODE

CONFIRM

COOL

Summary of Contents for SPACE V4 Series






























Search results

Summary of Contents for SPACE V4 Series

Reviews:

Related manuals for SPACE V4 Series

Brands by name

Popular brands

Daitsu SPACE V4 Series, User Manual

Search results

Summary of Contents for SPACE V4 Series

Reviews:

Related manuals for SPACE V4 Series

Brands by name

Popular brands