background image

15

Use ''◄ ''

 ''► ''

 ''▼''

 ''▲''to move to ”YES”, press 

"OK" to cancel timer. If you want to exit CANCEL TIMER, 

press “BACK”.

   The ECO or COMFORT MODE has the highest 

priority, the TIMER or WEEKLY SCHEDULE has 

the second priority and the PRESET TEMP. or 

WEATHER TEMP. SET has the lowest priority.
    The PRESET TEMP. or WEATHER TEMP. SET 

becomes invalid, when we set the ECO or 

COMFORT valid. We must reset the PRESET 

TEMP. or WEATHER TEMP. SET when we set 

the ECO or COMFORT invalid.

  TIMER or WEEKLY SCHEDULE is invalid when 

ECO or COMFORT is valid. TIMER or WEEKLY 

SCHEDULE is activated when the ECO or 

COMFORT is not running.

   TIMER and WEEKLY SCHEDULE are on the 

same priority. The later setting function is valid. 

The PRESET TEMP. becomes invalid when 

TIMER or WEEKLY SCHEDULE is valid. The 

WEATHER TEMP. SET is not affected by the 

setting of TIMER or WEEKLY SCHEDULE.
    PRSET TEMP. and WATHER TEMP.SET are 

on the same priority. The later setting function is 

valid.

INFORMATION

i

All about the time set items(PRESET TEMP. 

 

ECO/COMFORT

 DISINFECT

  DHW PUMP

  TIMER

  WEEKLY SCHEDULE

SILENCE 

MODE 

 HOLIDAY HOME), the ON/OFF of the 

corresponding function can be activated from 

the start time to the end time.

INFORMATION

i

6.5 Options

OPTIONS menu contents as following:

1) SILENT MODE

2) HOLIDAY AWAY

3) HOLIDAY HOME

4) BACKUP HEATER

You have to reset TIMER/WEEKLY SCHEDULE, 

if you change the WATER FLOW TEMP. to the 

ROOM TEMP. or you change the ROOM TEMP. 

to the WATER FLOW TEMP.

The TIMER or WEEKLY SCHEDULE is invalid, if 

ROOM THERMOSTAT is effect.

INFORMATION

i

schedule check

 

can only check the weekly schedule.

Go to ''MENU'' > ''SCHEDULE'' >''SCHEDULE' CHECK''. 

Press''OK''. The following page will appear:

6.4.3 Schedule check

WEEKLY SCHEDULE CHECK

SCHEDULE

WEEKLY

SCHEDULE

SCHEDULE

CHECK

CANCLE

TIMER

TIMER

ENTER

OK

NO      MODE   SET   START   END

WEEKLY SCHEDULE CHECK

DAY

MON

0

00:00 00:00

 T1        HEAT

0

00:00 00:00

 T6        HEAT

0

00:00 00:00

 T5        HEAT

0

00:00 00:00

 T4        HEAT

0

00:00 00:00

 T3        HEAT

0

00:00 00:00

 T2        HEAT

Press ''▼''

 ''▲'' , the timer from Monday to Sunday  will 

appear:

Go to ''MENU'' > ''SCHEDULE'' >''CANCEL TIMER''. 

Press''OK''. The following page will appear:

6.4.4 CANCEL TIMER

If TIMER or WEEKLY SCHEDULE is activated, timer 

icon ''      '' or weekly schedule icon ''        '' will display on 

the home page.  

Do you want to cancel the

SCHEDULE

WEEKLY

SCHEDULE

SCHEDULE

CHECK

CANCLE

TIMER

TIMER

ENTER

OK

timer and weekly schedule?

NO

YES

If TIMER or WEEKLY SCHEDULE is canceled,  icon''     '' 

or   ''        '' will disappear on the home page.  

7

7

Summary of Contents for SPACE V4 Series






























Reviews: