Dake Corporation
724 Robbins Road
Grand Haven, MI 49417
www.dakecorp.com
5
REV082018
SPECIFICATIONS
Number
907001
Ram travel
5”
Capacity
25 tons
Screw travel
5”
Width between uprights
33-1/2”
Height
76”
Width between table channels
5
-3/16”
Weight
460 lbs
Min ram to table
4”
Base
42-1/2” x 30”
Max ram to table
39”
In the space provided record the serial number and model number of the machine. This
information is only found on the black and gold Dake tag shown below. If contacting Dake this
information must be provided to assist in identifying the specific machine.
SAFETY
This is the safety alert symbol.
When you see this symbol on your press be alert to the
potential for personal injury.
Employer is responsible to perform a hazard/PPE assessment before work activity.
Follow recommended precautions and safe operating practices.
Additional Warnings:
•
Carefully read all safety messages in these instructions and on your press safety
signs.
•
Keep safety labels in good condition. Replace missing or damaged safety labels.
•
Employer is responsible to perform a hazard/PPE assessment before work activity.
•
Do not alter this press from its original design.
•
Do not make repairs or adjustments to any hydraulic system unless you are competent
or working under competent supervision.
•
Only use Dake original parts.
Serial No.
Model No.
Install Date:
