background image

MAN#650780 

SERVICE AND REPAIR 

DAKOTA DIGITAL offers complete service and repair of its product line.  In addition, technical support is 
available to help you work through any questions or problems you may be having installing one of our 
products. Please read through the Troubleshooting Guide.  There, you will find the solution to most 
problems. 
 
For additional support, please visit 

www.dakotadigital.com

. 

A “

Product Support

” link will be found at the 

bottom of the home page. 
 

Should you ever need to send the unit back for repairs, please call our technical support line, (605) 
332-6513, to request a Return Merchandise Authorization number.

   

  Package the product in a good quality box along with plenty of packing material.   

 

Ship the product by a common carrier with tracking abilities.  

 

 

Be sure to include the RMA number on the package.

 

 

Include a complete description of the problem, with RMA number, your full name and address (street 
address preferred), and a telephone number where you can be reached during the day.  

 

 

Any returns for warranty work must include a copy of the dated sales receipt from your place of 
purchase.  

 

 

Send no money.  We will contact you for payment.  

 

 

Dakota Digital Limited Lifetime Warranty

 

DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use 
and condition, be proven defective in material or workmanship for the lifetime of the original vehicle it was 
installed in, such defect(s) will be repaired or replaced at Dakota Digital’s option.  
 
This warranty does not cover nor extend to damage to the vehicle’s systems, and does not cover diagnosis, 
removal or reinstallation of the product. This Warranty does not apply to any product or part thereof which in 
the opinion of the Company has been damaged through alteration, improper installation, mishandling, 
misuse, neglect, or accident.   Dakota Digital assumes no responsibility for loss of time, vehicle use, owner 
inconvenience nor related expenses. 
Dakota Digital will cover the return standard freight once the product has been evaluated for warranty 
consideration, however the incoming transportation is to be covered by the owner. 
 
This Warranty is in lieu of all other expressed warranties or liabilities. Any implied warranties, including any 
implied warranty of merchantability, shall be limited to the duration of this written warranty. No person or 
representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in 
connection with the sale of this product. 
 
 

WARNING:

 This product can expose you to chemicals including lead, which is known to the State of 

California to cause cancer and birth defects or other reproductive harm. For more information go to 

www.P65Warnings.ca.gov

 

 
 
 

 

 

 

Summary of Contents for BIM-12-2

Page 1: ...ssigned an ID from 1 16 or turned off The factory default ID numbers are 11 and OFF for the two inputs respectively The factory default labels are EGT and HEAD respectively Labels available for each input are EGT Exhaust gas temperature input This will display EGT E or EGT TEMP EGT A Exhaust gas temperature input This will display EGT A EA or EGT TEMP A EGT B Exhaust gas temperature input This wil...

Page 2: ...ta harness Hold the SW1 switch from the gauge system control box while turning the key on The message display should show SETUP Release SW1 Press and release SW1 until BIM is shown on the message display Press and hold SW1 The message display should show SCAN followed by the number of BIM channels detected Release SW1 If 0 is shown check all connections and then press and hold SW1 with SCAN shown ...

Page 3: ...ID indicates the sender is connected properly indicates the sender is not connected or the signal is too high indicates an internal measurement problem If the input is turned off the digit will be blank The second screen will show the ID assigned to channel 1 The third screen will show the ID assigned to channel 2 Troubleshooting guide Problem Possible cause Solution _ Sensor does not show on PWR ...

Page 4: ... product that should it under normal use and condition be proven defective in material or workmanship for the lifetime of the original vehicle it was installed in such defect s will be repaired or replaced at Dakota Digital s option This warranty does not cover nor extend to damage to the vehicle s systems and does not cover diagnosis removal or reinstallation of the product This Warranty does not...

Reviews: