background image

 

 

MAN# 650153 

GREEN wire 

from LED 
assembly

Turn Signal wire 

from vehicle 

harness

BROWN wire 

from LED 

assembly

Tail Light wire 

from vehicle 

harness

BLACK wire 

from LED 
assembly

Ground wire from vehicle 

harness

with plastic housings

BLACK wire 

from LED 
assembly

Attach to metal bolt or screw 

for Ground connection with 

metal housings

OR

 

 

 

LED wires 

Vehicle harness 

Taillight 

Brown 

Brown  

Driver’s Turn 

Green 

Green  

Passenger’s Turn 

Green 

Yellow  

Ground 

Black 

Chassis or body 

 

13. Repeat for the other side. 
14. Test the tail lights, brake lights, and turn signals.  If the turn signals do not flash you will need 

to upgrade your flasher.  If you are replacing only the rear turn signals you should be able to 
use a heavy duty electronic flasher from your local parts store.  If you are replacing both front 
and rear or do not have front bulbs you will need a no-load flasher, Dakota Digital part number 
LAT-NLF. 

 

 

 

Service and Repair 

DAKOTA DIGITAL offers complete service and repair of its product line.  In addition, technical consultation is available to help you work through any questions or 

problems you may be having installing one of our products. Please read through the Troubleshooting Guide.  There, you will find the solution to most problems. 

Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise Authorization 
number.

  Package the product in a good quality box along with plenty of packing material.  Ship the product by UPS or insured Parcel Post.  Be sure to include the RMA 

number on the package, and include a complete description of the problem with RMA number, your full name and address (street address preferred), and a telephone number 
where you can be reached during the day.  Any returns for warranty work must include a copy of the dated sales receipt from your place of purchase.  Send no money.  We will 
bill you after repair.   

 

Dakota Digital Limited Lifetime Warranty

 

DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in material or 

workmanship for the lifetime of the original vehicle it was installed in, such defect(s) will be repaired or replaced at Dakota Digital’s option.  

This warranty does not cover nor extend to damage to the vehicle’s systems, and does not cover removal or reinstallation of the product.  This Warranty does not 

apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, neglect, or 
accident. 

This Warranty is in lieu of all other expressed warranties or liabilities.  Any implied warranties, including any implied warranty of merchantability, shall be limited to 

the duration of this written warranty.  No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with the 
sale of this product. 

 
 
 
 
 
 

 

4510 W. 61ST St. N., Sioux Falls, SD  57107 

Phone: (605) 332-6513      FAX: (605) 339-4106

 

www.dakotadigital.com

 

dakotasupport@dakotadigital.com

 

 
 

©Copyright 2006 Dakota Digital Inc. 

 

Summary of Contents for LED Tail Lights LAT-NR100

Page 1: ...ets from the housing Then remove the housing hardware so it can be removed from the car Remove the housings from the vehicle carefully so the housing to body gaskets are not damaged 2 Next remove the lens The 67 68 Camaro has six screws that hold the housing halves together which will need to be removed to gain access to lens The 70 73 Camaro lens has tabs locking it into the plastic housing Pry t...

Page 2: ...he LED assembly it is a 5 8 6 32 machine screw This will remove the mounting bracket that will need to be changed c Locate the supplied longer mount bracket and reattach using the shorter supplied 1 2 6 32 machine screw The shorter screw must be used since the taller mount is thinner Tighten the screw down in the center of the slot The LED assembly can be moved up or down to adjust the height of t...

Page 3: ...rt by cutting off the existing light socket as it will not be used Do not strip wires Trim the wires from LED assembly to appropriate length once mounted making sure wires are routed cleanly and securely 12 Use the supplied moisture resistant pigtail connectors to attach the wires from the new LED assembly to the existing vehicle harness Insert appropriate wire from vehicle harness and mating LED ...

Page 4: ...plenty of packing material Ship the product by UPS or insured Parcel Post Be sure to include the RMA number on the package and include a complete description of the problem with RMA number your full name and address street address preferred and a telephone number where you can be reached during the day Any returns for warranty work must include a copy of the dated sales receipt from your place of ...

Reviews: