background image

 

 

page 8 

 

MAN#650265 



 is flashing in message 

center 

engine is over heating. 

correct cause of engine overheating.  

SERV 



 

is flashing in the message 
center 

One of the countdown service meters 
has reached zero 

Perform service and reset service meter by 
holding switch when service meter is displayed. If 
service meter operation is not desired, disable 
service meter by setting to 



 in the setup menu. 

Temp / oil screen will not 

display 

Temp / oil display is disabled. 

In setup menu change the option “

 

TEMP 

OIL

” to “



” 

Message center jumps to 

a screen and blinks 

A warning has occurred with the 
blinking reading. 

If a warning is not desired for this reading, change 
the warning point under “



” in setup. 

Can not get into setup / 

can not change message 

center display 

Switch disconnected 

Check switch and wiring for breaks in the wire or 
loose connections. 

Gauge always starts in 

setup 

Switch wire shorted to ground. 

Check wire to switch for shorts or pinched wires. 

Speedometer reads low or 

does not read a speed 

Speed calibration is too high for 
vehicle. 

Recalibrate speedometer. See speed auto or 
speed adjust in setup notes. 

Speedometer reads high. 

Speed calibration is too low for vehicle. 

Recalibrate speedometer as described in setup. 

 
 

SERVICE AND REPAIR 

DAKOTA DIGITAL offers complete service and repair of its product line.  In addition, technical consultation is available to help you work through any questions or 

problems you may be having installing one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to most problems. 

Should you ever need to send the unit back for repairs, please call our technical support line, (605) 332-6513, to request a Return Merchandise Authorization 
number.

  Package the product in a good quality box along with plenty of packing material.  Ship the product by UPS or insured Parcel Post.  Be sure to include the RMA 

number on the package, and include a complete description of the problem with RMA number, your full name and address (street address preferred), and a telephone number 
where you can be reached during the day.  Any returns for warranty work must include a copy of the dated sales receipt from your place of purchase.  Send no money.  We will 
bill you after repair.   

 

Dakota Digital 24 Month Warranty

 

DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under normal use and condition, be proven defective in material or 

workmanship within 24 MONTHS FROM THE DATE OF PURCHASE, such defect(s) will be repaired or replaced at Dakota Digital’s option.  

This warranty does not cover nor extend to damage to the vehicle’s systems, and does not cover removal or reinstallation of the product.  This Warranty does not 

apply to any product or part thereof which in the opinion of the Company has been damaged through alteration, improper installation, mishandling, misuse, neglect, or 
accident. 

This Warranty is in lieu of all other expressed warranties or liabilities.  Any implied warranties, including any implied warranty of merchantability, shall be limited to 

the duration of this written warranty.  Any action for breach of any warranty hereunder, including any implied warranty of merchantability, must be brought within a period of 24 
months from date of original purchase.  No person or representative is authorized to assume, for Dakota Digital, any liability other than expressed herein in connection with 
the sale of this product. 

 
 
 
 
 
 
 

  

4510 W. 61ST St. N.,  Sioux Falls, SD  57107 

Phone: (605) 332-6513      FAX: (605) 339-4106

 

www.dakotadigital.com

 

dakotasupport@dakotadigital.com

 

©Copyright 2009 Dakota Digital Inc.

 

 

Summary of Contents for UTV-1500









Reviews: