Dakota Ultrasonics
38
altered, as well as any of the individual features in the gauge. The only keys that are
always unlocked are the power and probe zero keys, as these must remain unlocked
for measurement functionality.
The procedure to enable/disable the lock feature is outlined below:
Lock
1) With the
ZX-5
powered off, press and hold down the
key while
powering the
ZX-5
on
. The lock icon will be illuminated on the display.
2) To unlock the
ZX-5
repeat step one, but hold down the
key while
powering the
ZX-5
on
.
7.12 Factory Defaults
The
ZX-5
can be reset to factory defaults at any time to restore the original gauge
settings. This should only be used if the gauge is not functioning properly, or
perhaps multiple features have been enabled and a clean start is needed.
The procedure to reset the gauge is outlined below:
Factory Reset
1) With the
ZX-5 DL
powered off, press and hold down the
and
keys while powering the
ZX-5 DL
on
.
Summary of Contents for Z-303-0001
Page 2: ......
