ZX-1
Ultrasonic Thickness Gauge
17
Note:
Pressing the
key prior to pressing the
key will abort to the
measurement screen without saving changes.
3) When the desired
LITE
setting is displayed, press the
key to set the
status and edit the
BRT
(brightness) option.
4) Use the
keys to scroll through the
BRT
(LO, MED, HI)
options.
5) When the desired
BRT
setting is displayed, press the
key to set the
brightness and return to the measurement screen.
6.3 Lock
The lock feature was built into the
ZX-1
for the purpose of locking the operators out of
editing any of the gauge settings, for purposes of consistency between operators.
When the lock feature is enabled, the gauge calibration functionality cannot be
altered, as well as any of the individual features in the gauge. The only keys that are
always unlocked are the power and probe zero keys, as these must remain unlocked
for measurement functionality.
The procedure to enable/disable the lock feature is outlined below:
Lock
1) With the
ZX-1
powered off, press and hold down the
key while
powering the
ZX-1
on
. The lock icon will be illuminated on the display.
