Daktronics ALL SPORT 100, Operation Manual

Introduction

1

1  Introduction

This manual explains the operation of the All Sport

®

 100 control console and the RC-50 

wireless radio controller for segment timing functions. For additional information regarding 

the safety, installation, operation, or service of this system, refer to the telephone numbers 

listed in 

Daktronics Exchange and Repair & Return Programs (p� 2)

. 

Important Safeguards

• 

Read and understand all instructions, both general and for specific sports.

• 

Do not drop the control console or allow it to get wet�

• 

This device shall not be exposed to dripping or splashing, and no objects filled with 

liquid shall be placed upon it�

WARNING! To reduce the risk of fire or electric shock, do not expose this device to 

rain or moisture�

• 

Never yank the power cord to pull the plug from the outlet� Grasp the plug and pull to 

disconnect�

• 

Do not let the power cord touch hot surfaces or hang over the edge of a table that 

would damage or cut the cord�

• 

If an extension cord is necessary, use a three-pronged, polarized cord� Arrange the 

cord with care so that it will not be tripped over or pulled out�

• 

Before using an extension cord, inspect the cable thoroughly and verify its 

compliance with the local electric codes�

• 

Do not disassemble control equipment or electronic controls of the display; failure to 

follow this safeguard will make the warranty null and void�

• 

Inspect console for shipping damage such as rattles and dents, and verify that all 

equipment is included as itemized on the packing slip� Immediately report any 

problems to Daktronics; save all packing materials if exchange is necessary�

All Sport 100 control consoles receive external power from a wallpack power adapter or 

through a 20' (6.1 m) long cable plugged directly into a portable scoreboard. The same 

cable (part # 0A-1196-0095) also provides signal from the controller to the scoreboard.
RC-50 wireless handheld controllers receive power via an internal 3V lithium battery. 

Specifications Label

Serial and model number information can be found on an ID label on the device. Refer 

to 

Figure 1

.

When calling Daktronics customer service, please have the model number, serial 

number, and the date the device became operational available to ensure the request is 

serviced as quickly as possible.

ASSY NO.

SER. NO.

MFG DATE

BROOKINGS, SD  57006-5128 PHONE  800-325-8766 LL-2305 R01

201 DAKTRONICS DR.

DAKTRONICS

Figure 1: 

Specifications Label