Basic Operation
18
Switch Output
The All Sport 5500 console has a relay switch that can be used to control external
devices. The switch can be configured to operate under different clock or horn
conditions. The default setting is
1-CLOCK= 0
.
1�
Press the number key (
<0>
,
<1>
,
<2>
,
<3>
) as a shortcut or use the left and right arrow
keys to select the desired setting.
2�
Press
<YES>
to select the new setting, or press
<NO>
to leave the switch setting as is.
The possible settings for the switch output are displayed below:
Display
Action
SWITCH OUTPUT=N
0-DISABLED?
N = current setting
The switch remains open at all times and any external devices
are disabled.
SWITCH OUTPUT=N
1-CLOCK =0?
N = current setting
In count down mode, the switch closes when the main clock
reaches zero and stays closed until a nonzero value is entered.
In count up mode, the switch closes when the main clock
reaches the proper period, break, or overtime length and opens
when any other value is entered.
SWITCH OUTPUT=N
2-CLOCK =STOP?
N = current setting
The switch closes when the main clock is stopped and opens
when the main clock is running. External devices are disabled
when the main clock is running.
SWITCH OUTPUT=N
3-MAIN HORN?
N = current setting
The switch closes when the main horn sounds. This could be
when Auto Horn is enabled and the main clock reaches zero or
when
<HORN>
is pressed.
General Multi-Purpose Timer
There is no insert for the Multi-Purpose Timer codes. Code 99 is used to operate the multi-
purpose timer.
The Multi-Purpose Timer is a general timer used for 2-, 4-, and 6-digit time displays. The
timer will count up or down through hours, minutes, and seconds. The information will
shift on the 2- and 4-digit displays to show the most significant time values as the time
changes. The Multi-Purpose Timer code is also used as a Time-of-Day code by accessing
the Time of Day Menu through the Menu key. The Segment Timer may also be accessed
using the Menu key.
Standard Keys
The keys that are used by the multi-purpose timer are
<START>
,
<STOP>
,
<SET MAIN
CLOCK>
,
<COUNT UP/DOWN>
,
<AUTO HORN>
,
<MANUAL HORN>
and
<MENU>
. The key
functions are explained in more detail in
Standard Keys (p� 6)
.
Segment Timer
Refer to
Section 3: Segment Timer Operation (p� 20)
for details on accessing and
operating the segment timer function.
Summary of Contents for ALL SPORT 5500 SERIES
