– 4 –
Connecting to a Display
Prior to connecting to the display, verify that the display is turned on and connected to
the network currently in use. To connect to the display, follow the steps below:
1. Select the correct network adapter used to communicate with the display from the
Adapter Name
drop-down menu. Refer to
Figure 6:
Network Adapter Selection
2. Click
Find Displays
to detect any displays using the selected network adapter.
Detected displays are listed in the bottom window of the utility. Refer to
.
Figure 7:
Detected Displays
3.
Double-click the desired display to launch the configuration utility within a web
browser.
Dashboard
After logging into the player the first time, an initial screen opens showing status tiles
for various aspects of the device. This interface screen is called the
Dashboard
. For a
general overview of the system interface, refer to
on the dashboard, refer to
Click
Show Menu
in the upper-left corner of the screen to expand the left-side
menu. The left-side menu links are listed in
information on each menu item, refer to
and
Summary of Contents for DMP-8000 Series
Page 52: ...48 This page intentionally left blank...
Page 54: ...50 This page intentionally left blank...
Page 56: ......
Page 62: ...This page intentionally left blank...
