Daktronics SPORTSOUND 500HD, Installation Manual

STRINGER

FOR SIZE

SEE TABLE 1.

SCALE: 1:6 

3/16

3/16

TYP.

6"

3"

TYP.

COLUMN

3/16

3/16

TYP.

STIFFENERS

PL 3X6X3/8"

(4 PER COLUMN)

COLUMN TO STRINGER

SCALE: 1:6 

NOTES:

1.0 REFERENCE

1.1 REFER TO DAKTRONICS DRAWING: 1561-E10B-969776 FOR

SPORTSOUND 500HD ENGINEERING SPECIFICATIONS.

1.2 REFER TO DAKTRONICS DRAWING: 1561-E10B-992088 FOR  SIDE

PANEL/TRUSS MOUNTING DETAILS.

1.3 REFER TO DAKTRONICS RISER DIAGRAM FOR ALL ELECTRICAL

POWER AND DATA SPECIFICATIONS.

1.4  THE SHOWN SYSTEM IS PROVIDED TO ASSIST WITH ESTIMATING

INSTALLATION COSTS AND ARE NOT INTENDED FOR CONSTRUCTION

PURPOSES. THE DESIGN MUST BE CERTIFIED BY A PROFESSIONAL

ENGINEER LICENSED IN THE STATE OF THE INSTALLATION BEFORE

THEY CAN BE USED FOR FABRICATION OR ERECTION.

2.0 GENERAL NOTES

2.1  ALL DIMENSIONS ARE IN FEET AND INCHES.

2.2  REFER TO INSTALLATION AND MAINTENANCE MANUAL FOR

COMPLETE INSTALLATION INSTRUCTIONS.

3.0 SOUND CABINET NOTES

3.1  DAKTRONICS SOUND CABINET IS STEEL CONSTRUCTED

SKELETON WITH ALUMINUM PANELING FASTENED TO ITS EXTERIOR.

3.2  LIFTING POINTS ARE PROVIDED BY DAKTRONICS. WHEN LIFTING

USE 45° OR GREATER, FROM THE HORIZON, CABLE SYSTEM. ALIGN

LIFT EYES WITH CABLES.

3.3 REMOVE SHIPPING BRACKETS FROM TOP OF CABINET.

3.4 PAINT COLOR:

SPEAKER CABINET COLOR: POWDER COAT BLACK.

4.0  STRUCTURAL NOTES

4.1  FABRICATION AND ERECTION SHALL CONFORM TO THE LATEST

EDITION OF AISC SPECIFCATIONS.

4.2  ALL WELDING (SHOP AND FIELD) SHALL BE PERFORMED IN

ACCORDANCE WITH AWS D1.1-LATEST EDITION SPECIFICATIONS BY A

CERTIFIED WELDER USING E70XX ELECTRODES.

4.3 INTERNATIONAL BUILDING CODE 2006 USED IN DESIGN OF

SPORTSOUND CABINET SUPPORT MEMBERS WITH, IMPORTANCE

FACTOR=1, Kzt=1.0, Kd=0.85, G=0.85, Cf=1.8, z=40ft AND EXPOSURE C.

SEISMIC DESIGN WAS NOT CONSIDERED.

4.4  THE DESIGN WIND PRESSURES WERE SHIFTED AND ADJUSTED TO

ACCOUNT FOR ASCE 7 PRESCRIBED OFFSET EFFECTS.

4.5 ALL STRUCTURAL STEEL SHALL BE ASTM A36

(36 KSI) EXCEPT:

- WIDE FLANGE SHALL BE A992 (50 KSI) STEEL

    - TUBING SHALL BE A500-B (46 KSI)

4.6 ALL OPEN TUBE ENDS SHALL BE CAPPED AND WELDED ALL

AROUND.

STIFFENER DETAIL

HSS 4X4X3/16"

EXTENSION TUBE

STRINGER

FOR SIZE SEE TABLE 1.

SECTION A-A

(BOTTOM OF CABINET)

2X SCALE

(4) WELD

LOCATIONS

1'-1 5/8"

0'-2 7/16"

3'-0"

6'-0"

14

DISPLAY

LENGTH

(FT.)

90 MPH

COLUMN

SPACING

(FT.)

16

18

20

25

110 MPH

130 MPH

150 MPH

NUMBER

OF

COLUMNS

DESIGN WIND VELOCITY

STRINGER SIZE

28

32

36

2

9'-0"-11'-0"

2

8'-0"-10'-0"

2

11'-0"-13'-0"

2

12'-0"-14'-0"

2

14'-0"-16'-0"

3

9'-6"-11'-6"

3

10'-6"-12'-6"

3

12'-0"-14'-0"

HSS4X4X3/16

HSS4X4X3/16

HSS4X4X3/16

HSS4X4X3/16

HSS4X4X3/16

HSS4X4X3/16

HSS4X4X3/16

HSS4X4X3/16

HSS4X4X3/16

HSS4X4X3/16

HSS5X5X3/16

HSS5X5X3/16

HSS4X4X3/16

HSS5X5X3/16

HSS5X5X3/16

HSS5X5X3/16

HSS4X4X3/16

HSS5X5X3/16

HSS5X5X3/16

HSS5X5X3/16

HSS4X4X3/16

HSS4X4X3/16

HSS5X5X3/16

HSS5X5X3/16

HSS4X4X3/16

HSS4X4X3/16

HSS5X5X3/16

HSS5X5X3/16

HSS4X4X3/16

HSS4X4X3/16

HSS5X5X3/16

HSS6X6X3/16

TABLE 1

DISPLAY LENGTH

SS500HD

WT: 850LBS

8'-0"

LENGTH

3'-0"

HEIGHT

GRADE

SIDE VIEW

3'-6"

DEPTH

3'-0"

3'-0"

2'-9"

FRONT VIEW

DISPLAY HEIGHT IS MADE UP OF

ANY COMBINATION OF SCOREBOARDS,

AD PANELS, TRUSSES, AND MESSAGE

CENTERS.

DISPLAY

HEIGHT

VARIOUS

DISPLAYS

STRINGER

FOR SIZE SEE TABLE 1.

LENGTH = OUTSIDE TO

OUTSIDE OF COLUMNS

FRONT OF TUBE FLUSH

WITH FRONT OF THE

COLUMNS.

TOP VIEW

(STRUCTURE ONLY)

GRADE

IF THERE IS AN AD PANEL/TRUSS BESIDE

SPORTSOUND REFER TO DAKTRONICS

DRAWING: 1561-E10B-992088 FOR AD

PANEL/TRUSS MOUNTING DETAILS.

0'-3 1/2"

TOP OF DISPLAY

TO TOP STRINGER

ISOMETRIC REAR VIEW

CONTROL

ENCLOSURE

RIGID CONDUIT RAN FROM BOTTOM OF

SOUND CABINET TO BOTTOM OF

CONTROL ENCLOSURE FOR SPEAKER

CABLE DISTRIBUTION (50' LENGTH MAX.)

CABLE SUPPLIED BY DAKTRONICS

PRE-INSTALLED IN SOUND CABINET.

CONDUIT SUPPLIED AND INSTALLED BY

INSTALLATION SUBCONTRACTOR.

20AMP 120V SERVICE REQUIRED TO

CONTROL ENCLOSURE. SUPPLIED BY

OTHERS.

FIBER OPTIC CABLE-6 CORE REQUIRED

TO CONTROL ENCLOSURE. PROVIDED BY

DAKTRONICS INSTALLED BY INSTALLATION

SUBCONTRACTOR.

DAKTRONICS AUDIO

CONTROL ENCLOSURE.

140 LBS (W/ PADDLOCK)

ATTACH ENCLOSURE TO BEAM USING

SUPPLIED BEAM CLAMP MOUNTING

UNIT KIT PER DWG-1131068

HEIGHT TO BE APPROVED

BY CUSTOMER.

TYPICALLY HIDDEN

BEHIND SCOREBOARDS/ADS

FROM FRONT.

* MUST BE SERVICEABLE

WITH A LADDER *

C/L

C/L

3'-0"

GRADE
0' 0"

MAX. HEIGHT
40' 0"

ENSURE CONTROL ENCLOSURE

DOES NOT INTERFER WITH DISPLAY POLE

CLAMPS.

A

A

CONTROL ENCLOSURE MUST NOT INTERFER

WITH SCOREBOARD MTG HARDWARE.

2" MIN

2" MIN

TYP.

THE CONCEPTS EXPRESSED AND DETAILS SHOWN ON THIS

DRAWING ARE CONFIDENTIAL AND PROPRIETARY.    DO NOT

REPRODUCE BY ANY MEANS WITHOUT THE EXPRESSED

WRITTEN CONSENT OF DAKTRONICS, INC.

COPYRIGHT 2010 DAKTRONICS, INC.

DAKTRONICS, INC.

CH

DRAWN:

DATE:

SHEET

JOB NO:

REV

DAKTRONICS AUDIO SYSTEMS - SPORTSOUND 500HD

SS500HD MOUNTING W/POLE CLAMP DISPLAYS

DTREML

22 MAR 10

P1561

E 10 C

1/4"=1'

MSHRESTHA

982267

04

DATE:

REV

BY:

01

21 DEC 10

CJB

CHANGED 2 STRAND FIBER TO 6 STRAND FIBER

DATE:

REV

BY:

02

7 JUN 11

MBJ

UPDATED SIDE VIEW

DATE:

REV

BY:

03

12 MAR 12

KCS

ADDED 27' DISPLAY TO TABLE 1

27

2

14'-6"-16'-6"

HSS4X4X3/16

HSS5X5X3/16

HSS5X5X3/16

HSS6X6X3/16

DATE:

REV

BY:

04

10 APR 13

LMG

UPDATED VIEWS WITH CONTROL ENCLOSURE TO

SHOW UPDATED MOUNTING