Sportsound SSR-200 Gen II Quick Start Guide
DD3159573
Rev 02
01 April 2019
201 Daktronics Drive Brookings, SD 57006
www.daktronics.com/support
800.325.8766
Page 4 of 5
Optional Personal Monitor System Operation
Transmitter
1.
Flip the transmitter
POWER
switch to
ON
if it is not already on;
ensure the RF switch to the left of it is
OFF
at this time.
2.
Power on the handheld receiver using the volume knob.
3.
Attach the antenna and earphones to the top of the handheld
receiver.
4.
Flip open the battery cover to expose the control buttons. Press
SCAN
and the display will show “SYNC NOW”.
Note:
Insert new or fully-charged batteries prior to each use,
and always have spares on hand.
5.
Hold the bodypack up to the transmitter with the sync IR windows
facing each other, and press the
SYNC
button on the transmitter.
The display will show “SYNC SUCCESS” when finished.
6.
Flip the transmitter RF switch to
ON
. The blue LED on the receiver
should illuminate to indicate that it is detecting the transmitter.
1
5
6
3
2
4
Receiver
