ENGLISH
*2ND Time slOT sWiTCH-ON
at this point, the second time slot must be programmed.
The sequence to be followed is the same and is repeated as per the 1sT Time slOT sWiTCH-ON.
On this occasion simply enter the time, for example start at 15:00 and stop at 22:00 and to activate the days saturday and sunday by setting
them at "ON".
J
when the weekly proGraMMer is aCtive, a Box oF the relative iCon will appear on the
Control BoarD.
proGraMMinG exaMple
let's suppose that the weekly programmer function is to be used and 4 time slots are to be used in the following way:
- 1st time slot: from 08:00 to 12:00 every day of the week, with room temperature at 19°C, excluding saturday and sunday
- 2nd time slot: from 15:00 to 22:00 only on saturday and sunday, with room temperature at 21°C
CONTrOls prOCeDUre:
press key 6 and seT ClOCK will appear.
press key 2 until
enable chrono
appears
enable the chrono
enable slot 1 and 2.
press key 1 to exit
set
CloCk
enaBle
Chrono
1sT Time slOT sWiTCH-OFF
Use keys 4 - 5 to enter the time “
12:00
”,
which corresponds to the switch-off time of
the 1st time slot.
To confirm and continue programming,
press button 6. press button 3 to go back to
the previous parameter.
stop prG1
12:00
* Where “ENABLE CHRONO” is not present
in the menu, enabling is done directly in
SET CHRONO.
CONTrOls prOCeDUre:
press key 2 and seT CHrONO will appear.
set Chrono
eNaBliNg THe 1sT Time slOT Days
To enable/ disable the days use keys 4 and
5; key 2 and 3 to scroll the various days, the
day of the week will appear, followed by
oFF
select from monday to Friday on
on
,
excluding saturday and sunday (OFF)
MonDay..prG1
on-oFF
press key 6 to confirm and continue
programming.
start prG1 oFF
will appear.
start prG1
oFF
1sT Time slOT TemperaTUre seTTiNg
press key 6 to confirm and continue
programming.
Using buttons 4 - 5 select the desired
temperature.
(low -07 - 40°C Hot)
To confirm and proceed press key 6.
set prG1
19°C
1sT Time slOT sWiTCH-ON
Use keys 4 - 5 to enter the time “
08:00
”,
which corresponds to the switch-on time of
the 1st time slot.
To confirm and continue programming,
press button 6. press button 3 to go back to
the previous parameter.
start prG1
08:00
2ND Time slOT sWiTCH-ON*
at this point, the second time slot must be
programmed.
The sequence to be followed is the same
and is repeated as per the 1sT Time slOT
sWiTCH-ON.
start prG2
oFF
50
