61
2
2
2
2
1
2
3
2
2
2
2
2
2
geNerAL MeNu
bAsIC INsTruCTIONs
The following recommendations must be followed the first
times the stove is ignited:
It is possible that slight odours are produced due to the
drying of the paints and silicones used. Do not remain in the
environment for long periods.
Do not touch the surfaces as they could still be
unstable.
Air the room well several times.
The hardening of the surfaces is terminated after several
heating processes.
This appliance must not be used to burn waste.
Before lighting the stove, the following points must be
verified:
The hydraulic system must be completed in compliance
with the guidelines of the regulations and the manual.
The tank must be full of pellets
The combustion chamber must be clean
The burn pot must be completely free and clean
Check the hermetic closure of the fire door and the ash
drawer
Check that the power supply cable is connected correctly
The bipolar switch in the rear right part must be positioned
on 1.
| eNgLIsh
DO NOT use ANy INFLAMMAbLe LIquIDs FOr IgNITION!
DO NOT ALLOW The bAg OF PeLLeTs TO COMe INTO CONTACT WITh The bOILINg hOT sTOVe DurINg The FILLINg PhAse!
IN The eVeNT OF CONTINuOus NO IgNITION, CONTACT AN AuThOrIseD TeChNICIAN.
TeChNIC seT
(reserVeD TO
The quALIFIeD
TeChNICIAN)
seT POWer
seT ADjusTMeNTs
sTATus
seT TeMPerATure
sTOVe sTATus
eNAbLe ChrONO
PeLLeTs
seT h2O
user MeNu
seT CLOCK
DIsPLAy
LANguAge
seT ChrONO
reseT
ON/OFF - MeNu exIT.
Press TO ACCess The MeNu.
TurN TO: seLeCT, ACCess, MODIFy.
Press TO MeMOrIse.
gO bACK TO The PreVIOus MeNu.
