62
| eNgLIsh
J
CLeAN CheCK uP 1 - 2
shOuLD The "CLeAN CheCK uP" ALArM be TrIggereD, MAKe sure ThAT
The bOTTOM OF The burN POT Is Free OF resIDues Or sCALes. The hOLes
AT The bOTTOM MusT be COMPLeTeLy Free TO guArANTee COrreCT
COMbusTION. (see ChAPTer “CLeANINg CArrIeD OuT by The user”)
ONe CAN use The FuNCTION
"PeLLeT FeeD ADjusTMeNT" TO ADjusT COMbusTION ACCOrDINg TO The
DesCrIbeD requIreMeNTs. IF The ALArM PersIsTs AND The AbOVe LIsTeD
CONDITIONs hAVe beeN CheCKeD, CONTACT The quALIFIeD AFTer-sALes
AssIsTANCe CeNTre.
BURN POT BOTTOM
IT Is PrOhIbITeD TO use The APPLIANCe WIThOuT The burN POT CONe
(see FIgure TO The sIDe). IN The CAse OF WeAr Or DeTerIOrATION requesT
AFTer-sALes AssIsTANCe FOr rePLACeMeNT OF The PArT (rePLACeMeNT
ThAT Is NOT uNDer guArANTee As The COMPONeNT Is subjeCT TO WeAr).
BURN POT CONE
-
+
ADjusTINg TIMe, DAy, MONTh AND yeAr
Set clock allows to adjust the time and date
CONTROLS PROCEDURE
From the main screen, turn P2 to select the icon
Press P2 to confirm
Turn P2 to select “SET CLOCK”
Confirm, pressing P2
Turn P2 to select the desired parameter
Press P2 to enter modification mode
Turn P2 to modify the value
Press P2 to confirm and exit
If you wish to exit without memorising, press key P1
DAy
HOURS
MINUTES
DATE
MONTH
yEAR
SATURDAy
23
21
04
06
12
SET CLOCK
-
+
ADjusTINg LANguAge
The boiler allows to set the following languages: Italian, English, French, German and Spanish
ITALIAN is the default setting
CONTROLS PROCEDURE
Turn P2 to select the icon
Press P2 to confirm
Turn P2 to select “LANGUAGE”
Confirm, pressing P2
Turn P2 to select the desired parameter
Press P2 to enter modification mode
Turn P2 to modify the value
Press P2 to confirm and exit
If you wish to exit without memorising, press key P1
ENGLISH
LANGUAGE
COMMIssIONINg seTTINgs
Once the power cable at the back of the stove has been connected, move the switch, also located on the back, to (I).
The switch at the back of the stove powers the stove board.
The stove remains off and a first screen appears on the panel reading OFF .
