0,0
0,5
1,0
1,5
2,0
2,5
0
1
2
3
4
5
6
ENGLISH
FRIDA IDRO
VALLÌ IDRO
JOLE IDRO
MARTA IDRO
INSTANT DOMESTIC HOT WATER PRODUCTION KIT
Warnings:
if the instant hot water production kit is to be used, contact the company technical after-sales service.
STOVE POSITIONING
For correct product functioning, it is recommended to position it in a way that it is perfectly level, with the aid of a spirit level.
REARMING
The figures below show the positions for rearming the tank (85°C) and H2O (100°C).
We recommend contacting a qualified technician in the event rearming occurs to verify its cause.
*Content of water in the system in addition to that of the
thermo product that can be managed with the integrated
expansion vessel. An additional expansion vessel must be
installed for a higher content of water.
The following graph shows the behaviour of the circulator
pump used on our thermo-products at the speeds that can be
set.
Flow rate (m
3
/h)
Head (m)
85 °C
85 °C
85 °C
85 °C
100°C
100°C
100°C
100°C
THERMO-PRODUCTS FEATURES
JOLE
IDR
O
M
ART
A
IDR
O
FRID
A
IDR
O
M
ART
A
IDR
O
Water content of the thermo product heat exchanger (l)
13
18.5
15
18.5
Volume of expansion vessel integrated into thermo-product (l)
6
8
8
8
Maximum content of water in the system for integrated expansion vessel (l)*
23
33
36
33
3 bar safety valve integrated into the thermo-product
YES
YES
YES
YES
Minimum and maximum pressure switch integrated into the thermo-product
YES
YES
YES
YES
Pump integrated into the thermo-product
YES
YES
YES
YES
Pump max. head (m)
5
5
5
5
48
