ENGLISH
COMMISSIONING SETTINGS
Once the power cable at the back of the stove has been connected, move the switch, also located on the back, to (I).
The switch at the back of the stove powers the stove board.
The stove remains off and a first screen appears on the panel
with the word OFF.
ADJUSTING TIME, DAY, MONTH AND YEAR
Set clock allows to adjust the time and date
CONTROLS PROCEDURE
Press button 6 and
SET CLOCK
will appear.
Confirm using key 6.
Use keys 4 and 5 to assign the day
.
Proceed pressing key 2
Follow the same procedure (4 or 5 to set and 2 to proceed)
to adjust the hours, minutes, date, month and year.
Press key 1 several times to confirm and exit the Menu.
SET CLOCK
DAY
MON, TUE, WED, ...SUN
HOURS
0...23
MINUTES
00...59
DATE
1...31
MONTH
1...12
YEAR
00...99
ADJUSTING LANGUAGE
It is possible to select the preferred language to display the various messages.
CONTROLS PROCEDURE
Press key 6, until the text
SET CLOCK
appears.
Press key 2 twice
until
SET LANGUAGE.
Confirm using key 6.
Select the language using key 4 o 5.
Confirm using key 6 then key 1 to exit the Menu.
SET LANGUAGE
LANGUAGE
ITALIAN
ENGLISH
GERMAN
FRENCH
SPANISH
J
NO IGNITION
FIRST IGNITION COULD EVEN FAIL AS THE AUGER IS EMPTY AND IS NOT ALWAYS ABLE TO LOAD THE BURN POT
WITH THE REQUIRED AMOUNT OF PELLETS ON TIME TO REGULARLY START THE FLAME.
IF THE PROBLEM OCCURS AFTER ONLY A FEW MONTHS WORKING, CHECK THAT ROUTINE CLEANING STATED IN THE
STOVE BOOKLET, HAS BEEN CARRIED OUT CORRECTLY.
J
CLEAN CHECK UP 1 - 2
SHOULD THE "CLEAN CHECK UP" ALARM BE TRIGGERED, MAKE SURE THAT
THE BOTTOM OF THE BURN POT IS FREE FROM RESIDUES OR SCALES. THE
HOLES AT THE BOTTOM MUST BE COMPLETELY FREE TO GUARANTEE
CORRECT COMBUSTION.
"PELLET FEED ADJUSTMENT" TO ADJUST COMBUSTION ACCORDING
TO REQUIREMENTS. IF THE ALARM PERSISTS AND THE ABOVE LISTED
CONDITIONS HAVE BEEN CHECKED, CONTACT THE QUALIFIED AFTER-
SALES ASSISTANCE CENTRE.
BURN POT BOTTOM
DO NOT USE ANY INFLAMMABLE LIQUIDS FOR IGNITION!
DO NOT ALLOW THE BAG OF PELLETS TO COME INTO CONTACT WITH THE BOILING HOT STOVE DURING THE FILLING PHASE!
IN THE EVENT OF CONTINUOUS NO IGNITION, CONTACT AN AUTHORISED TECHNICIAN.
62
