ENGLISH
DISPLAYS
DISPLAY
REASON
MEANING
START
The start phase is in progress
_
PELLET FEEDING
the continuous feeding of the pellets
during the ignition phase is in
progress
_
IGNITION
The ignition phase is in progress
START-UP
The start-up phase is in progress
_
BURN POT
CLEANING
The automatic burn pot cleaning is in
progress
_
FINAL CLEANING
The final cleaning is in progress
_
STAND-BY
COOLING
Start-up attempt while the stove is still
in cooling mode
Every time the stove displays one of the alarms listed above it will switch-
off automatically.
The alarm can only be released using button 1 when it switch-off has
been completed. The stove can only be switched back on when it
completely cold
WORK
The normal operating phase is in
progress, the stove is operating at the
set power
-
MODULATION
the stove is operating at minimum
-
STAND - BY
Stove off waiting for re-ignition due
to an external thermostat
The stove will only re-start when the external thermostat will
request it
STDBY-BLACK OUT
The stove is cooling after a power cut.
Once cooling is complete, it will automatically ignite
ROOM T
Displays room temperature (in the
models where provided)
-
HOFF
Stove off due to water temperature
over set
As soon as the water temperature drops below the set parameters,
the stove will switch back on
ANTI-FREEZE
The anti-freeze function is in progress
as the H2O t° is below the factory set
threshold
the pump is active until the water reaches the pre-set factory
par2°C
ANTILOCK
The pump anti-locking function is in
progress (only if the stove has been in
Off status for at least 96 hours)
the circulator is activated for the amount of time set by the
manufacturer to prevent it from locking
74