ENGLISH
ADJUSTING TIME, DAY, MONTH AND YEAR
Set clock allows the user to adjust the time and date
CONTROLS PROCEDURE
Press key 6.
Proceed by pressing key 2 until the word
SETTINGS
is displayed.
Confirm using key 6.
Proceed by pressing key 2 until
LANGUAGE
is displayed.
Confirm using key 6.
Use keys 4 or 5 to set the language.
Press key 1 several times to confirm and exit the menu.
SET LANGUAGE
LANGUAGE
ITALIAN
ENGLISH
GERMAN
FRENCH
SPANISH
PORTUGUESE
COMMISSIONING SETTINGS
Once the power cable at the back of the stove has been connected, move the switch, also located on the back, to (I).
The switch at the back of the stove powers the stove board.
The stove remains off and a first screen appears on the panel reading OFF.
OTHER FUNCTIONS
AIR DISCHARGE
This function allows the user to bleed any air in the stove. Once the function has been activated, the pump indicator light is activated on the
display (for 15 minutes 30 seconds the pumps will be powered, alternating with 30 seconds of downtime).
To activate the function:
With the stove "OFF" press keys 1 and 4 at the same time, enter the password "77" using keys 4 and 5 and confirm with key 6.
Cut the power to interrupt.
FIRST LOAD
This function allows the user to activate the pellet feeding motor reducer for continuous functioning.
To activate the function:
When the stove is cold and ''OFF'' press keys 2 and 5 at the same time for a couple of seconds, the scrolling message “
preload
” will appear
on the display.
To interrupt continuous loading simply press key 1.
CONTROLS PROCEDURE
Press key 6.
Proceed by pressing key 2 until the word
SETTINGS
is displayed.
Confirm using key 6.
Confirm
SET CLOCK
with key 6.
Use keys 4 or 5 to set and key 2 to move forward, to adjust the hours, minutes, day,
month and year.
Press key 1 several times to confirm and exit the menu.
SET CLOCK
DAY
MON, TUE, WED, ...SUN
HOURS
0...23
MINUTES
00...59
DATE
1...31
MONTH
1...12
YEAR
00...99
ADJUSTING LANGUAGE
It is possible to select the preferred language to display the various messages.
MAINS FREQUENCY 50/ 60HZ
In the event the stove is installed in a country with 60Hz frequency, the stove will display "frequenza rete errata" ("mains frequency incorrect").
Vary the frequency as described below.
CONTROLS PROCEDURE
Press key 6,
Select the frequency required using key 4 or 5.
Press key 6 to confirm and key 1 to return to the previous menus up to the initial status.
45
