ENGLISH
SET POWER
The following menu allows you to set the generator power Minimum power 1, maximum power 5.
CONTROLS PROCEDURE
�
Press key 6.
�
Confirm using key 6 -
SET POWER.
�
Use keys 4 or 5 to set the power.
�
Press key 1 several times to confirm and exit the menu.
TEMPERATURE SET
The following menu allows you to set:
�
The room temperature from OFF - 06 ...40°C
(for intended models).
The room temperature will be displayed alternately with the water
temperature on the display.
�
The boiler temperature from 65 - 80°C.
CONTROLS PROCEDURE
�
Press key 6.
�
Proceed by pressing key 2 until
TEMPERATURE SET
is displayed.
�
Confirm using key 6.
�
Use keys 4 or 5 to set the
ROOM AIR TEMP SET
.
�
Confirm using key 6.
�
Use keys 4 or 5 to set the
H2O TEMP SET
.
�
Press key 1 several times to confirm and exit the menu.
USER MENU
ENABLE FAN
This menu allows (
for the models envisioned
) to enable or disable the operation of the tangential fan.
CONTROLS PROCEDURE
�
Press key 6.
�
Proceed by pressing key 2 until
USER MENU
is displayed.
�
Confirm using key 6.
�
Use keys 4-5 to enable/disable ventilation.
�
Press key 1 several times to confirm and exit the menu.
1
V1- AIR
The menu allows the user to adjust the speed of the front fan in percentage (
for envisioned models
).
CONTROLS PROCEDURE
�
Press key 6.
�
Proceed by pressing key 2 until
USER MENU
is displayed.
�
Confirm using key 6.
�
Press key 2 until ''
V1 AIR
'' appears.
�
Use keys 4 -5 to increase (4) or decrease (5).
�
Press key 1 several times to confirm and exit the menu.
1
48
