3
EN
EN
The controller must be installed by a qualified professional (electrician) after carefully reading the product manual, and
installation must conform to safety standards.
CAUTION!
The controller's contacts are under voltage. During installation, maintenance, repair and setting, the controller must be
disconnected from the main source of voltage.
The controller is intended for the easy control of the rotation speed of a fan or similar products.
The controller must be placed in a junction box (box for the installation of a circuit breaker).
Model
Voltage (V)
Frequency
(Hz)
Maximum
output
power (W)
Degree of
protection
Weight (kg)
Dimensions
(mm)
Maximum
load (A)
ROV-300
230
50 / 60
300
IP 40
0.11
95×85×60
1.5
ROV-400
400
0.25
78×78×63
1.8
Safety requirements
Use
The original packing contains:
•
1 controller
•
User's Manual
•
Original packaging
Contents of the package
The ambient air must not contain explosive and corrosive particles.
Technical specifications
The controller must be installed on a vertical wall into a flush-mounted or external junction box indoors.
To ensure safe installation and operation, it is necessary to prevent:
•
penetration of water or rain drops
•
access of direct sunlight
•
placing the controller near heat sources and heating
The controller must be connected by means of connectors, the minimum distance between the contacts of which
should be 3 mm, and using a terminal board.
Connection must be made based on the diagram shown in
PIC
. 2.
Before assembly
ROV
-300
Summary of Contents for ROV-300
Page 18: ...18 BG BG BG 3 5 7 mm 2 5 C 40 C 80 25 C ROV 300...
Page 34: ...34 BG BG BG 2 5 C 40 C 80 25 C ROV 400...
Page 35: ...35...
