EN
Page | 41
13.2
Cleaning the grease filter
FIRE HAZARD!
Observe the filter changing and cleaning intervals. Failure to observe this may result in
fires due to accumulations of grease.
Replace the grease filter regularly. The frequency of replacement depends on the
operating hours and the application of the extractor hood.
1)
Housing
2)
Fan motor
3)
Fleece filter
1.
Push the catches of the filter grille inwards.
2.
Carefully remove the filter grille.
3.
Pull out the filter rails.
4.
Remove the fleece and fit a new fleece filter.
5.
Secure the fleece using the filter rails.
6.
Replace the filter grille.
7.
Connect the appliance to the power supply again.
This filter can neither be washed nor reused. Dispose of the filter with the household
waste.
13.3
Replacing the activated charcoal filter
Depending on the usage of the extractor hood, activated charcoal filters must be
replaced every six months, but at least every year. This filter can neither be washed nor
reused.
In order to guarantee proper absorption of the odours, the volume of activated charcoal
must match the extraction capacity of the hood. The high quality of the activated
charcoal guarantees efficient absorption of the kitchen odours with normal operation.
Therefore use only original filters and replace at regular intervals.
1.
Push the catches of the filter grille inwards.
2.
Carefully remove the filter grille.
3.
Turn the activated charcoal filter in counter-clockwise direction until it comes free
of the plastic lugs. Dispose of with household waste.
4.
Hook the new activated charcoal filter into the pins of the fan system and turn in
clockwise direction. Check that the filter is securely fitted.
5.
Replace the filter grille.
6.
Connect the appliance to the power supply again.
