DINCO CLASSIC
Page 11
Driving and operating
The right operation is important to obtain the optimal utilisation of your DINCO
CLASSIC Classic. This applies to fieldwork as well as security.
Each day before work is started check that no nuts or bolts are loose and that all
splits pins are intact.
When turning or reversing DINCO CLASSIC should be lifted.
No extra weight should be mounted on the DINCO CLASSIC, as the implement is not
designed for it.
During transport any side discs should be folded.
The shares give a heavy cultivation. Despite the heavy cultivation the field should be
left even and with no banks of any kind. This requires a correct adjustment of the
implement (see ”Adju
st
ment” page 6).
Working depth
DINCO CLASSIC can be adjusted to very light tillage in a depth of 4 to 5 cm. This is
possible only because the shape of the tine leaves the field level and completely cut.
Fig. 5
DINCO CLASSIC should be adjusted so that the rear roller carries it. The handle for the
tractor lift must be lowered completely when driving in the field so that the lift is
floating and can move with the terrain. The cultivation depth will thus be controlled by
the rear roller in the back and by the toplink in the front.
When changing the working depth a readjustment of the discs is necessary. The
discs are designed to work in the topsoil, however, they do not perform any real
tillage except levelling out the field after the tines, so that a suitable quantity of earth
is thrown back after the harrow tine.
