DINCO CLASSIC
Page 19
Replacing scrapers
1.
Screw the adjustment bolts (A, fig. 8) all the way in.
2.
Remove the bolts, which fasten the rotation, stand (C, fig. 8) and splitpin and
washer can be removed.
3.
Mount the old rotation stand on the new scraper and mount in reverse order.
Replacing rear roller
When replacing the cage roller or t-rings follow the same procedure as when replacing
bearings. Old bearings can be used, however, new ones are recommended.
Fig. 14
Replacing disc bearings
Disc bearings are changed together with the shank as one unit.
1.
Remove the bolts that fasten the shank stand to the frame, the discs and spindle
are now disengaged from the frame.
2.
Remove the bolts that fastens the shank and the spindle and the telescopic
piece can be dismantled.
3.
Mount a new shank with bearings and assemble in reverse order.