MAXICUT
Page 13
Limitations in the use of the machine
The following describes what the machine may/must not be used for:
The machine may only be used for tilling organic plant material in agricultural areas that have
been cultivated. Those areas to be tilled must have been subject to normal agricultural
maintenance, i.e. without significant bumps or holes. Any rocks in the field must be collected
from the normal scope of the area. The area must be reasonably drained.
The plant material cannot be more stiff than corn stalks
The machine may only be used after first being attached to an agricultural tractor, by way of
connection to the rear 3-point hitch. The machine can work at a maximum speed of 25km/h.
The speed shall however always be adjusted to the nature of the area. This means, for example,
that transverse crops must be driven over at a much lower speed to avoid extreme pressure on
the machine.
Any other use of the machine, which does not fulfil the aforementioned conditions, will be
considered as unauthorised use, and will therefore be in breach of the manufacturer's
warranty.
Summary of Contents for MAXICUT 260 Series
