DGM02
Device Manual
Made in Italy
DALCNET S.r.l.
36077 Altavilla Vicentina (VI)
–
Italy
Via Lago di Garda, 22
Tel. +39 0444 1836680
–
Rev.
06/12/2022 -
Pag.
21/32
MODBUS SLAVE & RS458
–
MODBUS RTU SLAVE (BUS 1 & BUS 2)
Setting BUS 1 (or BUS 2) as MODBUS RTU Slave in the pop-up menu activates the
RS485
sections and the
MODBUS RTU Slave
.
The fields displayed in the RS485 section for Bus 1 (or Bus 2) are:
“Baud rate";
"Stop bit";
"Parity".
The fields displayed in the
MODBUS RTU Slave
section for Bus 1 (or Bus 2) are:
"Slave ID";
The ID is selectable via the web server interface.
The information is received on the Modbus RTU Slave page.
It is possible to read and write 512 registers with a value from 0 to 255.
