ASSEMBLY INSTRUCTIONS:
Item No: 6065/445
1.
Place the base on a level surface
2.
Insert the bulbs into the bulb sockets (A)
3.
Screw the threaded rod (B) into the base.
4. Adjust the Knurl Nut (C) on the threaded rod (B).
This can be used to raise the shade
a little if necessary.
5. Place the shade (D) over the end of the
threaded rod (B) and tighten with the finial (E) securing the
shade (D) in place.
Uses (2) Maximum 60WATT Type “A” Bulb
Or (2) maximum 13Watt CFL bulb
(Bulbs not included)
Cleaning of your lamp
Unplug lamp, wipe with damp cloth.
Do not use abrasives.
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China Revision 4/23/12
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL PACKAGING
TO MINIMIZE DAMAGE.
