ASSEMBLY INSTRUCTIONS:
Item No: GB10366
1.
Place the base (A) on a level surface.
2.
Screw column (B) into base (A).
3.
Insert the harp (D) until it sits firmly into the saddle (C).
4.
Adjust the knurl nut (E) on harp (D.
This can be used to raise the shade a little if necessary.
5.
Place the shade (F) over the end of the harp (D) and
tighten the finial (G) securing the shade in place.
6.
Insert the bulb into the bulb socket.
Use (1) maximum 150 WATT, 3Way, Type “A” Bulb
Or (1) maximum 25WATT CFL Bulb
(Bulb not included)
Cleaning of your lamp.
Unplug lamp, wipe with a damp cloth.
Do not use abrasives
*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Made in China Revision – 06/25/12
FOR RETURN SHIPPING PURPOSES:
PLEASE RETAIN ORIGINAL
PACKAGING TO MINIMIZE DAMAGE.
